Savage Gear MP Rodholder

The Savage Gear MP Rodholder can be positioned on the top or side of a boat gunwale. Its rotating support arms allow the rod angle to be adjusted, while the closed rear rest and open front support keep the rod secure without preventing a quick strike.

Savage Gear MP Rodholder Overview

The Savage Gear MP Rodholder provides a convenient way to support a fishing rod while trolling, drifting or presenting live bait. It mounts directly onto a suitable boat edge or railing using its wide screw clamp.

The Savage Gear MP Rodholder is designed to fit many common boat gunwales and rail structures. Boat surfaces vary, so the mounting area should always be measured before ordering.

Strong Aluminium Construction

The main support arms of the Savage Gear MP Rodholder are made from high-grade aluminium wire. Aluminium provides a useful balance of strength, rigidity and manageable weight for portable boat equipment.

The rod-contact areas have a non-slip rubber coating. This helps the Savage Gear MP Rodholder grip the rod securely while reducing direct contact between the fishing rod and bare metal.

Construction Benefits

• Strong aluminium support arms
• Rigid design for dependable rod support
• Non-slip rubber-coated contact areas
• Reinforced mounting block
• Suitable for freshwater and sea fishing
• Portable clamp-on construction

The reinforced nylon and carbon-style block adds support between the clamp and rod-rest arms. This helps the Savage Gear MP Rodholder remain stable while a rod is under normal trolling or bait-fishing pressure.

Wide Clamp for Boat Mounting

The Savage Gear MP Rodholder uses a screw-operated G-clamp that attaches to a suitable boat gunwale, railing or flat mounting edge. Its wide jaw opening accommodates many common boat structures.

Retailer specifications place the maximum opening at approximately 68 to 70mm. Before installing the Savage Gear MP Rodholder, measure the thickness and shape of the intended mounting point.

Mounting Advantages

• No permanent drilling required
• Quick installation and removal
• Wide clamp opening
• Suitable for many small and medium boats
• Can be moved between fishing positions
• Useful for temporary boat setups

The clamp should be tightened firmly but not excessively. Overtightening the Savage Gear MP Rodholder may damage softer boat surfaces or place unnecessary stress on the clamp.

Use a protective pad between the clamp and delicate painted or composite surfaces when necessary. Check the attachment regularly while fishing.

Rotating and Adjustable Rod Position

The support arms of the Savage Gear MP Rodholder can rotate and be positioned on the top or side of the clamp. This provides flexibility when setting the rod angle for different fishing techniques.

A more horizontal position may suit trolling, while a raised angle can be useful for stationary bait fishing. The Savage Gear MP Rodholder allows the setup to be adapted to the boat layout and water conditions.

Rod-Rest Design

• Closed rear support
• Open front support
• Quick rod removal
• Adjustable angle
• Top or side positioning
• Rotating support arms

The closed rear section helps prevent the rod from sliding backward. The open front allows the angler to lift the rod quickly when a fish strikes.

This design makes the Savage Gear MP Rodholder more practical than a fully enclosed holder when immediate rod access is important.

Best Uses for the Rod Holder

The Savage Gear MP Rodholder can support several boat-fishing techniques. Its strongest applications are trolling and stationary bait presentations.

Trolling

During trolling, the Savage Gear MP Rodholder keeps the rod in a consistent position while the lure moves behind the boat. The adjustable angle helps control line direction and rod-tip height.

Live-Bait Fishing

The holder can support the rod while a live or dead bait is presented below or behind the boat. The open front rest allows the angler to remove the rod quickly.

Drift Fishing

The Savage Gear MP Rodholder can also be useful when drifting baits or lures across productive water. The angler can watch the rod tip while keeping both hands available for other tasks.

Sea Fishing

The aluminium and rubber-coated construction makes the holder suitable for many sea-fishing situations. It should still be rinsed after every saltwater trip.

Freshwater Boat Fishing

The Savage Gear MP Rodholder can be used for pike, zander, catfish and other freshwater boat techniques where a supported rod is helpful.

Browse more fishing accessories, compare our fishing rods, or explore additional fishing reels.

Installation and Safety Guide

Choose a firm and stable mounting point before installing the Savage Gear MP Rodholder. Avoid thin, cracked or flexible boat edges that may not support the clamp safely.

Installation Steps

1. Measure the intended mounting surface.
2. Open the G-clamp wide enough to fit.
3. Position the clamp on a strong boat edge.
4. Tighten the screw until the mount is secure.
5. Position the rod-rest arms.
6. Check that the holder cannot rotate unexpectedly.
7. Place the rod in the rear and front supports.

Test the Savage Gear MP Rodholder by applying gentle pressure before beginning to fish. Recheck the clamp after travelling through waves or changing the holder angle.

Important Safety Tips

• Do not exceed the strength of the mounting surface
• Check the clamp regularly
• Use a rod safety leash when appropriate
• Do not leave heavy tackle unattended
• Keep the holder clear of walking areas
• Remove the rod before moving at high speed

A safety leash can provide additional security when using the Savage Gear MP Rodholder with expensive rods or when fishing in rough water.

Cleaning and Storage

Rinse the Savage Gear MP Rodholder with fresh water after saltwater exposure. Pay attention to the clamp screw, joints and areas beneath the rubber coating.

Dry the holder completely before storage. Apply a small amount of suitable corrosion-resistant lubricant to the clamp screw when needed, avoiding the rubber rod-contact surfaces.

Care Checklist

1. Rinse after saltwater use.
2. Remove sand and dirt.
3. Dry the aluminium frame.
4. Inspect the rubber coating.
5. Check the clamp threads.
6. Tighten any loose fittings.
7. Store in a dry location.

Inspect the Savage Gear MP Rodholder for bent arms, damaged rubber or corrosion before every fishing trip. Stop using it if the clamp or reinforced block shows structural damage.

For responsible boating and fishing information, visit Take Me Fishing. Anglers can also review recognized fishing practices through the International Game Fish Association.

Frequently Asked Questions

What is the Savage Gear MP Rodholder made from?

The Savage Gear MP Rodholder uses high-grade aluminium wire, non-slip rubber coating and a reinforced mounting block.

How wide does the clamp open?

The maximum opening is listed at approximately 68 to 70mm, depending on the retailer’s measurement.

Does it require drilling?

No. The Savage Gear MP Rodholder uses a removable screw-operated G-clamp, so permanent drilling is normally unnecessary.

Can the holder rotate?

Yes. Its fold-out support arms can rotate and be positioned on the top or side of the clamp.

Is it suitable for trolling?

Yes. The Savage Gear MP Rodholder is designed for trolling, live-bait fishing and other boat-fishing techniques.

Will it fit every boat?

It fits many boat gunwales and rail structures, but buyers should measure the mounting area before ordering.

Does the rubber coating protect the rod?

Yes. The non-slip coating helps grip the fishing rod and reduces contact with bare aluminium.

Can it be used in saltwater?

Yes. The Savage Gear MP Rodholder can be used for sea fishing, but it should be rinsed and dried afterward.

Can the rod be removed quickly?

Yes. The closed rear and open front design helps hold the rod securely while allowing fast removal during a strike.

Final Verdict

The Savage Gear MP Rodholder provides a strong, portable and adjustable rod-support solution for boat anglers.

Its aluminium construction, rubber-coated rests, wide clamp and rotating arms make the Savage Gear MP Rodholder useful for trolling, drifting and live-bait fishing.

For anglers who need a clamp-on holder without permanently modifying their boat, the Savage Gear MP Rodholder offers dependable support and flexible positioning.